Gas Fires‎ > ‎

Flueless Fires

Here are some examples of the gas fires we sell at
Morecambe Gas Showrooms.

Why not call in to see our full range or contact us to find out more.



The Environ  4240

As Burley’s flueless gas fires do not rely on a chimney, they provide an unsurpassed level of safety. Flueless gas fires are designed to burn the gas extremely cleanly without a flue. The burnt gases are then passed through a catalytic converter. Every Burley flueless gas fire has an oxygen depletion sensor which constantly monitors the air quality in the room. If the level of oxygen drops by just 1.5%, the fire automatically shuts down.
Fuel
Natural Gas
Type of Heat
Radiant & Convected
Heat Output (High) up to 2.5kW
Minimum Roomsize
30m2
Net Efficiency 100%
Control  Manual / Remote
Warranty 1 Years - conditions apply




The Environ 
4247

Fixed flueless gas fires were introduced to Britain in 1999. Although the concept is relatively new in this country, fixed flueless gas fires have a long established history in Japan (where there are 40 million), the United States (approx' 20 million) and Australia. Fixed flueless gas fires give a combination of convenience, efficiency and safety. We have entered an era of spiralling energy prices, gas shortages and global warming. The 100% efficient flueless fire helps with all 3.
Fuel
Natural Gas
Type of Heat
Radiant & Convected
Heat Output (High) up to 2.5kW
Minimum Roomsize
30m2
Net Efficiency 100%
Control  Manual / Remote
Warranty 1 Years - conditions apply


The Environ 4242


Some of the heat from an open flued gas fire or solid fuel fire goes straight up the chimney. By comparison 100% of the heat generated by a flueless gas fire goes into the room. Tests by Burley compared a 2.5kW flueless gas fire (Burley Environ), to open flued gas fires. The tests showed that the flueless fire produced more than three times more heat per kilowat than an open flued fire.
Fuel
Natural Gas
Type of Heat
Radiant & Convected
Heat Output (High) up to 2.5kW
Minimum Roomsize
30m2
Net Efficiency 100%
Control  Manual / Remote
Warranty 1 Years - conditions apply



 The Acumen 4111 CH-R

The Acumen flueless fire is designed to be wall mounted. It is a hole in the wall type appliance, which means part of the fire is recessed into the wall or chimney breast. This results in less protrusion into the room. Its huge 4.5KW output makes it suitable for those larger rooms.

Fuel
Natural Gas
Type of Heat
Radiant & Convected
Heat Output (High) up to 4.5kW
Minimum Roomsize
50m2
Net Efficiency 100%
Control Remote
Warranty 1 Years - conditions apply


The Latitude 4500 and 846 Trim


The Latitude flueless gas fire is designed to be wall mounted but is streamlined in design to avoid the need to recess it into the wall. The 846 Polished and buffed trim creates a unique contemporary effect. Its total output of 2.5KW makes it ideal for more compact rooms*.


Fuel
Natural Gas
Type of Heat
Radiant & Convected
Heat Output (High) up to 2.5kW
Minimum Roomsize
30m2
Net Efficiency 100%
Control Manual
Warranty 1 Years - conditions apply


The Latitude 4500 and 842 Trim

Left is shown the Latitude with the 842 trim, giving the fire the two tone look. Again it is designed for use as a wall mounted fire with no need for cutting into the wall. Simply connect it to gas and fit an appropriate vent.An air vent is required. Specific room volume required.


Fuel
Natural Gas
Type of Heat
Radiant & Convected
Heat Output (High) up to 2.5kW
Minimum Roomsize
30m2
Net Efficiency 100%
Control Manual
Warranty 1 Years - conditions apply


Comments